No wifi, bluetooth options in Zorin 17.1 [closed]

Sharing the output to the command

sudo lshw -C network  *-network UNCLAIMED              description: Network controller       product: BCM43142 802.11b/g/n       vendor: Broadcom Inc. and subsidiaries       physical id: 0       bus info: pci@0000:03:00.0       version: 01       width: 64 bits       clock: 33MHz       capabilities: pm msi pciexpress bus_master cap_list       configuration: latency=0       resources: memory:94100000-94107fff  *-network       description: Ethernet interface       product: RTL810xE PCI Express Fast Ethernet controller       vendor: Realtek Semiconductor Co., Ltd.       physical id: 0       bus info: pci@0000:04:00.0       logical name: eno1       version: 0a       serial: a0:8c:fd:26:d7:0f       capacity: 100Mbit/s       width: 64 bits       clock: 33MHz       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=6.5.0-45-generic firmware=rtl8107e-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=twisted pair       resources: irq:0 ioport:3000(size=256) memory:94004000-94004fff memory:94000000-94003fff  *-network       description: Ethernet interface       physical id: 6       bus info: usb@1:6       logical name: enx12ec448e6e2c       serial: 12:ec:44:8e:6e:2c       capabilities: ethernet physical       configuration: autonegotiation=off broadcast=yes driver=rndis_host driverversion=6.5.0-45-generic duplex=half firmware=RNDIS device ip=192.168.209.106 link=yes multicast=yes port=twisted pair

Also:

sudo lspci -vvnn | grep -A 10 Network03:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n [14e4:4365] (rev 01)    DeviceName: Broadcom BCM43142 802.11 b/g/n 1x1Wi-Fi + BT4.0 M.2 Combo Adapter    Subsystem: Hewlett-Packard Company BCM43142 802.11b/g/n [103c:804a]    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-    Latency: 0, Cache Line Size: 64 bytes    Interrupt: pin A routed to IRQ 0    Region 0: Memory at 94100000 (64-bit, non-prefetchable) [size=32K]    Capabilities: [40] Power Management version 3        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-

Wireless card info:iwconfiglo no wireless extensions.

eno1 no wireless extensions.

enx12ec448e6e2c no wireless extensions.

I have tried reinstalling the broadcom package but it doesnt seem to work.